Product Data Sheet (Abridged Version)
Description: Ultratect "DURON" is the next generation of Ultratect technology. Based upon patented formulations and resin technology, Ultratect "DURON" is the fastest curing Ultratect yet, providing excellent corrosion and chemical resistance that Lasts with the lowest environmental impact. Ultratect "DURON" Ultra Low VOC Polyurethane Clear is a high gloss, 0.3 lbs/gal VOC* conforming, low HAPS, polyurethane clear coat. The resulting finish product provides a brush, roll or sprayable topcoat suitable for use in any environment.
Suggested Uses: As a high performance, corrosion resistant, tough, industrial strength polyurethane clear coat over properly prepared, primed and top-coated aluminium, carbon steel, galvanized, concrete or dry wall where:
Not recommended for: Immersion service
Compatibility With Other Coatings:
.
Maximum Service Temperature:
250ºF (93ºC) in continuous service. 300ºF (148ºC) in intermittent heat.
Performance Properties:
VOC (Theoretical less water and exempt compounds).
This product contains TBAc.
4 to 1 25% Reduction 4 to 1 25% Reduction TBAc Exempt* TBAc Non-Exempt No Reduction 9M01™ 9M02™ No Reduction 9M01™ 9M02™
Without 1 oz VG-805™ 0.3 -- -- 2.3 -- -- With 1 oz VG-805™ -- 0.4 1.0 -- 2.4 2.9
*Where TBAc is considered an exempt solvent for contains requirements.
HAPS Information – Theoretical
Ultratect "DURON" – Mixed 4 to 1 no reduction – 0.01 lbs/gal solids Ultratect "DURON" – Mixed 4 to 1 with 25% Imron® 9M01™ or 9M02™ Thinner and 1 oz. VG-805™ Accelerator – 0.01 lbs/gal solids
Gloss Weight Solids Volume Solids 90+ 60º angle 57% 56%
Theoretical Coverage Per Gallon 881 ft2 (21.5 m2/l) @ 1 mill dft 441 ft2 (10.8 m2/l) @ 2 mill dft Material losses during mixing and application will vary and must be taken into consideration when estimating job requirements.
Suggested Film Builds 3-5 mills (75-125 μm) wet 2-3 mills (50 – 75 μm) dry Application by brush and roller may require additional coats to achieve recommended films thickness.
Weight per gallon – Average varies with colour 9.2 lbs
ASTM Information: Physical properties are average. Properties listed are for a system of Ultratect "DUCOR" and Ultratect "DURON" Total DFT 9 mills.
All technical advice, recommendations and services are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable, and are intended for professional use by persons having skill and know-how at their own discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from their use by Buyer in whole or in part. Such recommendations, technical advice or services are not to be taken as a license to operate under or intended to suggest infringement of any existing patent.